Sedgewall
can supply a wide range of Paging Transmitters. These
are transmitters which have been optimised to give the
best performance in the Paging environment be it POCSAG,
2/5 Tone, Tone and Voice and the latest protocols FLEX
and ERMES.
We have RF power
outputs available from just 0.5Watt to 100Watt continuously
rated. Higher powers can be supplied to order when necessary.
We assemble and test
all configurations of Transmitter in our workshop before
shipping and installing. The exact settings are made
here and fully tested.
Additional to the
Transmitter Range is a series of “Store and Forward”
units. These are used to extend the physical range of
the paging system beyond that covered by one Transmitter.
Pages are received, stored and then re-transmitted when
there are no other transmissions being made. This method
eliminates the need for Private Wire (PW) connections
from the Encoder to all but the first Transmitter in
the system. It is a very cost effective way of improving
and extending a system and helps create wide area networks.
The PT10000 Paging
Transmitter is designed to meet the rugged demands of
paging industry’s latest standards. The PT10000
is designed for large sites who require an extended
coverage region (such as a hospital or emergency service).The
PT10000 has a standard output power of 100 watts continuous
(adjustable 25-100 Watts) – specifically designed
to cope with the most rigorous environment.
Fully Synthesized Transmitter
Available in VHF / UHF
TTL or RS232 Signaling Levels
Optional Internal Encoder
Channel Busy Detection
Store
& Forward Transmitters
The Store & Forward
Paging Unit enables a POCSAG message to be decoded and
re-transmitted, to extend the range of a paging network.
By storing a received transmission and re-transmitting
the message after a predetermined delay, it is possible
to repeat POCSAG data on the same channel or re-transmit
it on another frequency.
Fully Synthesized Transmitter
POCSAG Decoding
Available in VHF / UHF
Channel Busy Detection
Please contact us about this item: Required
fields*